Shenzhen dingshen Industrial Co., Ltd

Shenzhen dingshen Industrial Co., Ltd

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsCOFDM Wireless Transmitter

900Mhz Long Range COFDM Wireless Transmitter 1 Watt

900Mhz Long Range COFDM Wireless Transmitter 1 Watt

  • 900Mhz Long Range COFDM Wireless Transmitter 1 Watt
900Mhz Long Range COFDM Wireless Transmitter 1 Watt
Product Details:
Place of Origin: China
Brand Name: Ding Shen
Model Number: DS-RM104
Payment & Shipping Terms:
Minimum Order Quantity: 1 Set
Price: Negotiation
Packaging Details: export standard packing
Delivery Time: 3-7 days
Payment Terms: T/T
Supply Ability: 1000PCS per month
Contact Now
Detailed Product Description
Frequency:: 902-928 MHz, 915-928 MHz International Variant Transmit Power Output:: @9600bpsthroughput Data Rate 1mW-1Watt
Weight:: 18 G Receiver Sensitivity:: 10,000bps -110dBm
Modulation:: FSK (Frequency Shift Keying) Operating Temperature:: -40 To 85º C (industrial)
High Light:

Long Range COFDM Wireless Transmitter

,

900Mhz COFDM Wireless Transmitter

,

1 Watt COFDM Wireless Transmitter

900Mhz High Speed Radio Data Modem 1 Watt RS-232 / RS485 Data Radio

 

Description:

 

The XTend RF Module was engineered to provide customers with an easy-to-use RF solution that provides reliable delivery of critical data between remote devices. The module transfers a standard asynchronous serial data stream, operates within the ISM 900 MHz frequency band and sustains up to 115.2 Kbps data throughput.

 

Key Features:

 

Advance Networking & Security

 

True Peer-to-Peer (no Master device required),Point-to-Point, Point-to-Multipoint & Multidrop

FHSS (Frequency hopping spread spectrum).10hopping channels,each with over 65,000 unique network addresses available

 

AES Encryption:

 

performed using a FIPS197 certified implementation on a Phillips LPC microcontroller

128-bit AES for international variant.

 

Low power consumption:

 

2.8 - 5.5 V Supply Voltage.

Pin,serial port and Cyclic

Software sleep modes supported

Shutdown pin enables hardware sleep mode,that draws only 5 µA(typical)

 

Easy-to-use:

  • No configuration necessary for out-of box RF communications
  • Free X-CTU software (Testing and configuration software)
  • RF modules easily configured using,standard AT & binary commands
  • Transparent Operation (wireless links replace serial wires)
  • API Operation (Frame-based communications)
  • Portable
  • (small form-factor easily designed into a wide range of data systems)
  • Software - selectable I/O interfacing rates
  • Multiple data formats supported (parity,stard and stop bits,etc.)
  • XII™ Interference Immunity
  • No Master/Slave setup dependencies

 

Specifications:

 

Performance    

Transmit power output

(software selectable using PL command)

@9600bpsthroughput data rate

1mW-1Watt

@115200bps throughput

data rate

1mW-1Watt

 

Throughput Data Rate

(software selectable using BR command)

9,600bps 115,200bps
Receiver sensitivity 10,000bps -110dBm 115,200bps -100dBm
Power requirement    
Receive current 80mA  
Shutdown mode power down

 

5 µA typical

 
Pin Sleep Power Down 147 µA  
Networking&security    
Frequency 902-928 MHz, 915-928 MHz International variant  
Spread spectrum FHSS (Frequency Hopping Spread Spectrum) 456
Modulation FSK (Frequency Shift Keying)  

Supported Network Topologies

Channel Capacity

Peer-to-Peer (“Master/Slave” relationship not required), Point-to-Point, Point-to-Multipoint, Mesh

10 hop sequences share 50 frequencies

 
Encryption 256-bit or 128-bit AES Encryption - Refer to the KY Command [p29] to implement  
Physical Properties    
RF module board size 1.44” x 2.38” x 0.20” (3.65 cm x 6.05 cm x 0.51 cm)  
Weight 0.64 oz. (18 g)  
Connector 9-pin  
Operating Temperature -40 to 85º C (industrial)  
Antenna    
Connector Options RPSMA (Reverse-polarity SMA) or MMCX  
Impedance 50 ohms unbalanced  

 

Pin Signal Descriptions:

(Low‐asserted signals distinguished with a horizontal line over signal name.)

 

Interface Definition

(Face up, from left to right)

Pin number

   
1   --
2 RX DATA receive
3 TX DATA transmit
4   --
5 GND Signal ground
6   --
7   --
8   --
9   --

 

Package:

 

1* Module

1* RS-232data cable

1* power line

1* small antenna

 

Optional accessories:

 

RS-232 programming cable. (For user get through the computer's RS232 interface module parameter settings)

USB interface programming join line. (for user get through the computer's USB interface module parameter settings)

the data transmission test equipment. (User-friendly in the selection or the actual use of the module testing)

optional antenna. (The user can follow according to their actual situation to choose their own antenna,so that achieve the best results)

 

Remark:

 

1, in order to achieve the best communication results, try to use a smaller power supply ripple factor, the maximum current power supply module should be greater than 1.5 times of the maximum current.

2, TTL, RS-485, RS-232 three interfaces can only choose one.

3, the transfer rates are divided into: the number of interfaces rate: users can be changed by KYLPRO.exe PC software;

 

 

 

 

Contact Details
Shenzhen dingshen Industrial Co., Ltd

Contact Person: admin

Tel: +8613480804763

Send your inquiry directly to us (0 / 3000)

Other Products